PLC control Rack Roll Forming Machine with High Speed Punching Press Machine,Racking Box Cold Roll Forming Equipment

Introduction

Racking roll forming machine adopts servo controlled material feeding technology for complex punching to guarantee precision. This storage rack roll forming machinery also adopts track cutting technology to ensure the machine capacity and gear box transmission and ensure the machine’s rigidity and working strength. Racking roll forming machine is also known as shelf roll forming machine, shelving rack roll forming machine, shelving roll forming machine or shelves rack roll forming machine. This storage rack roll forming machinery is composed of automatic decoiler, guiding device, leveling and feeding device, punching unit, molding parts, fly shearing system, run-out table, electronic control system and hydraulic system.

Technical Parameter

Main technical parameters:

1. Suitable material: color steel sheet or galvanized steel sheet
2.Thickness of raw material: 0.4-1.2mm

3. Yield strength of material: 235Mpa-345Mpa

4. Forming speed: about 20m/min

5. Power Requirement

Main motor power: 5.5Kw (Depend on final design)

Hydraulic station power: 2.2Kw (Depend on final design)

6. Uncoilers loading capacity Max. Capacity: 3000kgs (can be increased to be 10T)

7. Controlling system: Mitsubishi PLC & Converter

8. Machines weight: about 3-4T for different profile machine.

9. Machines size: about 3.8m×1.5m× 1.4m (Depend on final design)

Material of Main Equipment

Roller Material: High grade No.45 forged steel, with digital-controlled procession,

Plated with hard chrome.

Active Shaft Material: High grade No.45 carbon wrought steel,which can improve the integrated mechanic feature of the shaft. Shaft diameter is 50mm.

Electric Elements: PLC control panel, transducer imported from Mitsubishi of Japan.

Other elements from famous suppliers in China

Cutter blade and punch dies: Cr12 mould steel with quenched treatment

- No. of Work Station..........................12stations

- Max. Roll shafts Dia..........................76mm

- Overall L x W x H (Approx.)...............3.8M*1.2M*1.6M

- Roller material: GCR15 quenched 58°-62°,chromed

- Outside is cast iron, surface needed polish and paint. Inside is 60# forge and press metal)

- Transducer: Panasonic

- Cages.......................... use the strong steel nets

- Levelling screws on base ............with Thick metal paltes

NEW TYPE Metal Stud and Track Roll Forming Machine(The decoiler/uncoiler)

Usage: It is used to support the steel coil and uncoil it in a turntable way.

Passive uncoil pulled by roll forming system

Loading capacity: 1.5T

Uncoiling width: 300mm

Inner diameter: 450-550mm

NEW TYPE Metal Stud and Track Roll Forming Machine(Main Forming Machine)

Feature : Ensure stability , precision and lifetime.

 Mr. Mr. Gussi Wong

Tel: 86-510-5605508

Contact to this supplier