High Tensile Galvanised Steel CZ Purlin Roll Forming Machine With Auto Decoiler
| Place of Origin: | Zhejiang, China (Mainland) |
|
|
| Add to My Favorites | |
| HiSupplier Escrow |
Product Detail
Hi-Tensile Galvanised steel Z Purlin Roll Forming Machine with Auto Decoiler</stro
Hi-Tensile Galvanised steel Z Purlin Roll Forming Machine with Auto Decoiler
Introduction of Z Purlin Production Line
This metal roll former is desinged to process galvanized steel coils into high tensile Z shaped purlines within the thickness range 2.0-3.0mm. The punching dies and cutting blades are made by Cr12 mould steel which are with a strong hardness. The whole zee section production line adopts Mitsubishi PLC controller which realizes a full automatic working condition.
Technical Parameters of Z Purlin Manufacturing Machine
| No | Item | Parameter | Remark | |
| 1 |
Suitable
Material |
Type | Galvanized Steel | |
| Thickness(mm) | 2.0-3.0 | According to customer's requirement | ||
| Yield Strength(Mpa) | 230-300 | |||
| 2 | Forming Speed(m/min) | 10 | not including the punching and cutting | |
| 3 | Material of Punching Die | Cr12 steel bearing | with quenching treatment | |
| 4 | Cutting Mode | hydraulic cutting | According to customer's requirement | |
| 5 | Power source | Type | 380V/3PH/50HZ | According to customer's requirement |
Working Flow
Decoiling---->Sheet Guilding---->Rollforming---->Holes Punching---->Hydraulic Cutting---->Finished Z Purlins
Components of Z Purlin Manufacturing Machine
.jpg)
.jpg)
