Post Offer Free
SG Engineering Solution Lmt.  

Gold Index: 8316

You are here: home  > L Channel Angle Light Keel Roll Forming MachineFlexible Sheet Metal Forming Equipment

L Channel Angle Light Keel Roll Forming MachineFlexible Sheet Metal Forming Equipment 

Place of Origin: Zhejiang, China (Mainland) 
inquire
Add to My Favorites
HiSupplier Escrow
Share |

Product Detail

Model No.: S&G-C Purlin

light steel keel wall L channel angle steel roll forming machine,light tracks wall

light steel keel wall L channel angle steel roll forming machine,light tracks wall angle cold roll forming machine

 

 

Light steel frame light keel roll forming machine

The stud and track roll forming machine produces studs and tracks. The products of the stud and track forming machine are widely used as the supporters in ceilings, roofing, wall construction, etc.

 

Machine Configuration:

Decoiler, Feeding Applicator, Roll Forming Unit, Computer Control System, Hydraulic Punching, Hydraulic Cutting, Output Table

 

Working Flow:

Decoiler—Feeding Applicator—Roll Forming Unit—Computer Contol System—Hydraulic Cutting—Output Table

 

Machine Composition
1 : 5T hydraulic decoiler
The feeding unit is mechanically separated from the rest of the production line
Steel coil width: from 200 mm to 600 mm
Internal diameter of coil: variable, from 470 mm to 510 mm
Maximal out diameter:1600mm
Maximum coil weight: 5000 Kg
Coil placement in the coil holder: hydraulic hoist;
Device preventing unwinding of the coil from the coil holder: included
Oil cylinder dia.:100mm
Working speed: 0-15m/min adjustable
Main motor power: 5.5KW AC motor
Hydraulic power: 3 kw
Speed controlled by frequency converter brand: Yaskawa
The decoiler has 4 segments
Color: Blue (or base on customer request)
Quantity: 1

2 :Feeding→flatten→punching→ pre-cutting→forming station→correction adjust

Feeding
Adjustable center of the forming rollers and of sufficient length to prevent lateral movement of the strip on its entry to flattener.
Feeding type: adjustable
Feeding width range:200-600mm
Entrance and guide roller: diameter is 65mm, material is SAE1045, HRC48-52° surface with chrome
Quantity: 1
Flattener
The quantity of leveler rolls must be planned according to thickness 1.5mm to 3.0mm.
Flattener roller: upper is 3 rollers, down is 4 stations(total is 7 rollers)
Flattener roller material: SAE 1045 thermal treatment hardness 48-52 HRC
Diameter of flattener shaft: 76mm, material is SAE 1045, hardening and tempering
Drive by motor: 4kw AC motor (Guomao of China)
Quantity: 1
Punching:
Base on customer provide punching drawing, this machine need adopt two units hydraulic punching system
The punches and dollies will be CR-12, hardness HRC 58-62 and chrome coating both punches and dolies should be easily replaceable without requiring disassembly of complete units.
The whole punching operation should be automated and controlled by a program installed in the PC which is located in the operator's console.
Hydraulic power: 5.5kw
Working pressure: 12-16Mpa
 
Pre-cutting

 

Cutting type: hydraulic, connect with the punching hydraulic unit
Cutting power by hydraulic, 5.5KW AC motor
Hydraulic working pressure: 12-16Mpa
Cutting before forming: Cut the sheet before roll forming to required length
Cutting motion: The roll forming part is NON-stop when cutting
bigPhoto
 Mr. Mr. Gussi Wong

Tel: 86-510-5605508
Contact to this supplier

Related Search

Find more related products in following catalogs on Hisupplier.com

Company Info

SG Engineering Solution Lmt. [China (Mainland)]


Business Type:Manufacturer
City: Wuxi
Province/State: Jiangsu
Country/Region: China (Mainland)

You May Like:

Product (182)