Post Offer Free
SG Engineering Solution Lmt.  

Gold Index: 8316

You are here: home  > S&G C/Z purlin cold roll forming machineReady Fully Automatic C Purlin Production Line Machine Widt

S&G C/Z purlin cold roll forming machineReady Fully Automatic C Purlin Production Line Machine Widt 

Place of Origin: Zhejiang, China (Mainland) 
inquire
Add to My Favorites
HiSupplier Escrow
Share |

Product Detail

Model No.: S&G-C Purlin

S&G C/Z purlin cold roll forming machine,Ready Fully Automatic C Purlin Produc

S&G C/Z purlin cold roll forming machine,Ready Fully Automatic C Purlin Production Line Machine Width Adjustable

 


 

This type of the C/Z purlin cold roll forming machine is used to form components, such as purlins, having C-shaped and/or Z-shaped cross-sections from sheets of planar material.It is provided with a plurality of cold roll forming machine adapted to form the first and the second components each of which has a C-shaped cross section with a center portion and a pair of legs connected to the center portion, where the legs of the first component have a first length and the legs of the second component have a second length different than the first length. The cold roll forming machine include a first roll forming station having a plurality of forming rolls and a second roll forming station for forming the legs of the first and second components. The second roll-forming station has a first pair of forming rolls, a second pair of forming rolls, and a mechanism for supporting the pairs of forming rolls and for adjusting the position of the pairs of forming rolls from a first position in which the second pair of forming rolls make contact with a portion of the first component to a second position in which the second pair of forming rolls make contact with a portion of the second component.

 

Equipment structure:

It is making up of decoiler, guide rack, roll forming, correction, cutting-to-length(punching), collection table, electrical control system etc.

 

Unit performance:

(1) Machine capacity:width≤500mm,thickness:1-2.5mm
(2) Product speed: 0-15m/min
(3) Total power: about35.5kw
(4) Pressure:380V
(5) Occupy groud area:length 18m xwidth3m

 

Each part main parameter:

(1) Decoiler: decoiler,Inner expanding type,capacity:5T
(2) Guide Rack:two pairs of lever rollers and four pairs of standing rollers.
Flatting number:9 sets
(3) Roll forming

a) Type:GY180
b) Rack: Torii type,material:HT200
c) Roll forming rack:12 sets
d) The diameter of the roller axis:φ80mm, roller surface:500mm
Material: 40Cr quenching treatment HB280
e) Drive type:every rack has one gear power diatribution box.
f) Main power: 30kw frequency conversion,ZQ500 reducer
g) Material:GCr15, Quenching,Hardness:HRC58-62o
h) Assistant roller rack:4 sets

(4) Adjust part:Turkey emendation type(three-dimensional emendation)
(5) Cutting-to-length: Hydraulic pressure cutting

 

Specifications:

Material Raw material colored steel plate, galvanized plate, or aluminum plate
Thickness 1.5 - 3 mm (As customer`s need)
Feeding width 300mm-1000mm (According to customer`s profile)
Material hardness: 550 Mpa---350 Mpa
Manual Uncoiler Inner Diameter 450-550mm
Max Coil width 1500mm
Capacity 1-5T

Main Forming

machine

Forming steps 17 stations ( Depend on Profiles )
Shaft diameter Φ40-80mm
Design type Middle plate welded
Transmission Gear box (Chain and gear box depend on thickness and customer`s need)
Machine frame 350# H steel welded; Steel plate welded/ Memorial arch frame type
Roller material Gcr15MoV
Shaft material 45# steel with tempering
Cutting blade material Gcr12MoV quenched
Working speed 15-20m/min
Power of machine 3-11KW (According to the thickness)
Type of cutting Hydraulic
Cutting tolerance ±1mm
Material of blades Gcr12 quenched
Cutter quantity 1 set
Working pressure 20MPA
Hydraulic cutting system Hydraulic oil 46#
Hydraulic power 7.5KW
Cutting length As required
Frame Pillar style with rack & pinion system
Stroke switch Non-contact photoelectric switch
The system includes a set of hydraulic tank, a set of hydraulic oil pump, and two hydraulic pipes. And two sets of electromagnetism valves.
Configurations

Uncoiling→ (Perforation machine )→Feeding material into machine→ Roll forming→Auto cutting→ Products receiving

N.B: you can choose the Perforation machine and punching part as your demand.

 

Other Spare part

 

Weight About 14 ton
Dimension 10300mm * 1800mm * 1400mm
Main body color As required
Voltage 380v/50hz/3ph(or as required)
Spare cutting blade One piece
Fuse 2 pieces
Relay 2 pieces
Travel switch 2 pieces
Solenoid valve 1 pieces
bigPhoto
 Mr. Mr. Gussi Wong

Tel: 86-510-5605508
Contact to this supplier

Related Search

Find more related products in following catalogs on Hisupplier.com

Company Info

SG Engineering Solution Lmt. [China (Mainland)]


Business Type:Manufacturer
City: Wuxi
Province/State: Jiangsu
Country/Region: China (Mainland)

You May Like:

Product (182)