Post Offer Free
SG Engineering Solution Lmt.  

Gold Index: 8316

You are here: home  > 0.3mm - 0.5mm Galvanized Sheet PU Sandwich Panel Production Line 300KW Power

0.3mm - 0.5mm Galvanized Sheet PU Sandwich Panel Production Line 300KW Power 

Place of Origin: Zhejiang, China (Mainland) 
inquire
Add to My Favorites
HiSupplier Escrow
Share |

Product Detail

Model No.: S&G-PU Sandwich Wall Panel

Continuous PU polyurethane / Mineral Wool / Rock Wool / PIR / Phenolic/Sandwich Panel M

Continuous PU polyurethane / Mineral Wool / Rock Wool / PIR / Phenolic/Sandwich Panel Machine / Production Line

 
Main Features:
 

  • 1. Panel from the continuous sandwich panel production line is a composite structure consisting of two external facings and an insulating core. The core can be flexible with Polyurethane, Mineral Wool, Glass Wool, PIR, Phenolic or EPS. Various profiles are available according to customer's requirement with pre-painted steel sheets, PVC sheets, Aluminum paper or other similar supports;
  • 2. The continuous sandwich panel production line has a large scale production capacity. It allows a uniform distribution of the reactive mixture, a homogeneous density, suitable physical and mechanical characteristics. ;
  • 3. Roof panels, wall panels and door panels are made mainly of metal section support and polyurethane insulating mass;
  • 4. The capacity of the continuous line is 3-7m/min, length of the production line is 100m, the size of the final panel is 3-18m long, 900-1200mm wide, 20-150mm thick, the valid length of double belt conveyor is 24m, the total power is 300KW;


 
 

 

More Specifications:
MaterialRaw materialcolored steel plate, galvanized plate, or aluminum plate
Thickness0.3-0.8 mm (As customer`s need)
Feeding width300mm-1250mm (According to customer`s profile)
Material hardness:550 Mpa---350 Mpa

Hydraulic Uncoiler
(With Coil Car)

Inner Diameter510-610mm
Max Coil width1250mm
Capacity10T/8T
Hydraulic cylinder lift strokeUp panel 0.5m, Down panel 0.5m
Coil car stroke2.5m
Pressure of hydraulic system6.3Mpa

Main Forming
machine

Forming steps24 stations ( Depend on Profiles )
Shaft diameterΦ60mm
Design typeMiddle plate welded
TransmissionGear box (Chain and gear box depend on thickness and customer`s need)
Machine frame350# H steel welded; Steel plate welded/ Memorial arch frame type
Roller materialGcr15MoV
Shaft material45# steel with tempering
Cutting blade materialGcr12MoV quenched
Working speed12-15m/min
Power of machine260KW (According to the thickness)
Type of cuttingHydraulic
Cutting tolerance±1mm
Material of bladesGcr12 quenched
Cutter quantity1 set
Working pressure20MPA
Pre-heating RoomTemperature sensorHot couple
Temperature adjustmentAutomatic control by temperature control equipment
Hot air motor18.5Kw
Hot air heater200Kw
Heat typeHeated by electricity and air circulate
Flying Saw Cutting MachineOutline dimension of band saw cutting machine5500mmx5000mmx 3000mm
Run speed of band saw1000-1500rpm
Rotate diameter of band saw550mm
Cutting speed of band saw50m/min-1000m/min
Width of band saw30mm
Length of band saw3000mm-4000mm
Transverse move distance1500mm
Cut length on line3000mm
Configurations

Uncoiling→ (Perforation machine )→Feeding material into machine→ Roll forming→ PU foaming→ Pre-heating Room→ Auto cutting→ Products receiving
N.B: you can choose the Perforation machine and punching part as your demand.

 

 

Other Spare part
 

WeightAbout 25 ton
Dimension42000mm * 3600mm * 3300mm
Main body colorAs required
Voltage380v/50hz/3ph(or as required)
Suitable working temperatureAbout 25
Spare cutting bladeOne piece
Fuse2 pieces
Relay2 pieces
Travel switch2 pieces
Solenoid valve1 pieces

 
 
 
 
 
 
 
 
 
 
 
 

Applications:
Continuous polyurethane production line is widely used in steel structure workshop, steel villa, housing, supermarkets, air duct, public places.

 

 

Pu Sandwich Panel Picture:

Machine Picture:

 

bigPhoto
 Mr. Mr. Gussi Wong

Tel: 86-510-5605508
Contact to this supplier

Related Search

Find more related products in following catalogs on Hisupplier.com

Company Info

SG Engineering Solution Lmt. [China (Mainland)]


Business Type:Manufacturer
City: Wuxi
Province/State: Jiangsu
Country/Region: China (Mainland)

You May Like:

Product (182)