Sandwich Panel Roll Forming Machine Continuous Line For Industrial & Residential Sectional Doors S&G-PU Sandwich Wall Panel manufacturer from China SG Engineering Solution Lmt.

Sandwich Panel Roll Forming Machine Continuous Line For Industrial & Residential Sectional Doors

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: S&G-PU Sandwich Wall Panel

Sandwich Panel Production Line for Garage doors,Continuous line for industrial &am

Sandwich Panel Production Line for Garage doors,Continuous line for industrial & residential sectional doors production

The plant is able to produce doors with adjustable widths from 366 mm to 800 mm, with industrial and residential joints.
Here following the main final goals:

production change, type of panel, in less than 3 minutes;
format change, dimensions of the panel, in less than 3 minutes;
coil store managing;
coil color controlled in line;
automatic handling, based upon an open cut list, of different types and combinations of product also with very low quantities, changes of color and coil type during production, of surface pattern (12 types), of cassette pattern (6 types), of vertical drawing (4 types), of embossing patters (2 types);
reduction of production scraps;
very high quality of the final product in terms of perfect repeatability, in time, of perfect design and of the dimensions of the final products.

More Specifications:

Material	Raw material	colored steel plate, galvanized plate, or aluminum plate
	Thickness	0.3-0.8 mm (As customer`s need)
	Feeding width	300mm-1250mm (According to customer`s profile)
	Material hardness:	550 Mpa---350 Mpa
Hydraulic Uncoiler (With Coil Car)	Inner Diameter	510-610mm
	Max Coil width	1250mm
	Capacity	10T/8T
	Hydraulic cylinder lift stroke	Up panel 0.5m, Down panel 0.5m
	Coil car stroke	2.5m
	Pressure of hydraulic system	6.3Mpa
Main Forming machine	Forming steps	24 stations ( Depend on Profiles )
	Shaft diameter	Φ60mm
	Design type	Middle plate welded
	Transmission	Gear box (Chain and gear box depend on thickness and customer`s need)
	Machine frame	350# H steel welded; Steel plate welded/ Memorial arch frame type
	Roller material	Gcr15MoV
	Shaft material	45# steel with tempering
	Cutting blade material	Gcr12MoV quenched
	Working speed	12-15m/min
	Power of machine	260KW (According to the thickness)
	Type of cutting	Hydraulic
	Cutting tolerance	±1mm
	Material of blades	Gcr12 quenched
	Cutter quantity	1 set
	Working pressure	20MPA
Pre-heating Room	Temperature sensor	Hot couple
	Temperature adjustment	Automatic control by temperature control equipment
	Hot air motor	18.5Kw
	Hot air heater	200Kw
	Heat type	Heated by electricity and air circulate
Flying Saw Cutting Machine	Outline dimension of band saw cutting machine	5500mmx5000mmx 3000mm
	Run speed of band saw	1000-1500rpm
	Rotate diameter of band saw	550mm
	Cutting speed of band saw	50m/min-1000m/min
	Width of band saw	30mm
	Length of band saw	3000mm-4000mm
	Transverse move distance	1500mm
	Cut length on line	3000mm
Configurations	Uncoiling→ (Perforation machine )→Feeding material into machine→ Roll forming→ PU foaming→ Pre-heating Room→ Auto cutting→ Products receiving N.B: you can choose the Perforation machine and punching part as your demand.

Other Spare part	Weight	About 25 ton
	Dimension	42000mm * 3600mm * 3300mm
	Main body color	As required
	Voltage	380v/50hz/3ph(or as required)
	Suitable working temperature	About 25
	Spare cutting blade	One piece
	Fuse	2 pieces
	Relay	2 pieces
	Travel switch	2 pieces
	Solenoid valve	1 pieces

Features of EPS Panels

1. Energy saving
You can save air-conditioning and heating expenses remarkably, thanks to its excellent insulation effect as mush as 4. 2 times of cement brick.